|
技術資料・文献 - 1994
以前以下には、FEMtoolsについて、記述された文献やFEMtoolsを応用した技術資料を紹介します。 以下の多くのPDFドキュメントは英文で記述されています。
M. Van Leeuw, P. Vanhonacker, Improvement of the Accuracy of
SYSTUS Modal Analysis Results, Based on Experimental Modal
Parameters, SYSTUS-MEF/MOSAIC International Users Meeting,
October 1993, Chantilly, France.
E. Dascotte, O. von Estorff, J. Wandinger, Validation and
Updating of MSC/NASTRAN Finite Element Models using Experimental
Modal Data, Proceedings of the 20th MSC Users' Conference,
September 1993, Vienna, Austria.
E. Dascotte, J. Strobbe, Feasibility of Damage Detection in
Composite Structures using Test-Analysis Integration Techniques,
Proceedings of the 1st International Conference on Structural
Dynamics Modeling, NAFEMS/DTA, July 1993, Cranfield, UK.
H. Hua, H. Sol, Finite Element Model Updating of a Short Fiber
Reinforced Composite Material Structure. International
Conference on Structural Dynamics Modeling, NAFEMS/DTA, July 1993,
Cranfield, UK.
E. Dascotte, P. Vanhonacker, An Integrated Approach to Finite
Element Model Validation: Software Tools and Case Study in
Automotive Industry, SAE Noise & Vibration Conference, May
1993, Traverse City, Michigan, USA.
E. Dascotte, C.F. McCulloch, Practical Methods for Correlating
and Updating Finite Element Dynamics using Test Data: Software Tools
and Case Studies, Institute of Physics Conference on Stress and
Vibration Analysis, April 1993, Sheffield, UK.
E. Dascotte, Linking Finite Element Analysis and Test: Case
Study in Automotive Industry, Proceedings of the 11th
International Modal Analysis Conference, February 1993, Orlando,
Florida.
E. Dejehet, M.N. Van Leeuw, P. Vanhonacker, Practical
Applications of Finite Element Model Tuning Using Experimental
Data, Proceedings STRUCOME 92, November 1992, Paris, France.
M. Van Leeuw, E. Dascotte, SYSTUNE Software: Practical
Applications of Finite Element Model Tuning using Experimental Modal
Data, Seminar on "Vibrations", Belgian Society of Mechanical
Engineers, October 92, Brussels, Belgium.
J. Strobbe, M.N. Van Leeuw, E. Dascotte, Material
Identification of Composite Structures from the Combined use of
Finite Element Analysis and Experimental Modal Analysis, ASTELAB
92, June 92, Paris, France.
E. Dascotte, Material Identification of Composite Structures
from the Combined Use of Finite Element Analysis and Experimental
Modal Analysis, Proceedings of the 10th International Modal
Analysis Conference, February 1992, San Diego, California.
E. Dascotte, C.F. McCulloch, P. Vanhonacker, Validating and
Updating Finite Element Models using Experimental Measurements of
Dynamics, Journal Of Aerospace Engineering, Proceedings, Part
G., Mechanical Engineering Publications Ltd., Suffolk, England.
C. McCulloch, E. Dascotte, A Robust Methodology for Updating
Finite Element Models, Proceedings AUTOTECH 91, November 1991,
Birmingham.
C. McCulloch, Assessment Of The Dynamic Stiffness Of Joints
Between Sheet Metal, Using Modal Testing, Correlation And Updating
Of Finite Element Models, Final Report, Sheffield Polytechnic,
June 1991.
E. Dascotte, G. Desanghere, Updating of Force
Functions, Proceedings of the 9th International Modal
Analysis Conference, April 1991, Florence, Italy.
E. Dascotte, Tuning of Large-Scale Finite Element Models,
Proceedings of the 9th International Modal Analysis Conference,
April 1991, Florence, Italy.
E. Dascotte, SYSTUNE: A General System for Finite Element
Model Tuning, Proceedings STRUCOME 90, November 1990, Paris,
France.
E. Dascotte, Application of Sensitivity Analysis and Finite
Element Model Tuning on a Car Body, Proceedings of the 15th
International Seminar On Modal Analysis and Structural Dynamics,
September 1990, Leuven, Belgium.
E. Dascotte, Practical Applications of Finite Element Model
Tuning using Experimental Modal Data, Proceedings of the 8th
International Modal Analysis Conference, February 1990, Orlando,
Florida.
E. Dascotte, Finite Element Model Tuning in Practice,
Proceedings STRUCOME 89, November 1989, Paris, France.
E. Dascotte, C.F. McCulloch, P. Vanhonacker, 'Validating and
Updating Finite Element Models using Experimental Measurements of
Dynamics, Proceedings AEROTECH 89, November 1989, Birmingham,
England.
E. Dascotte, Automatic Finite Element Model Correction Based
on Vibration Tests, Proceedings FEMCAD 89, October 1989, Paris,
France.
C. McCulloch, Updating Finite Element Models using
Experimental Modal Data, Benchmark Magazine, NAFEMS, April
1989.
E. Dascotte, P. Vanhonacker, Development of an Automatic
Mathematical Model Updating Program, Proceedings of the 7th
International Modal Analysis Conference, Las Vegas, Nevada, February
1989.
E. Dascotte, Error Localization and Updating of Spacecraft
Structures Mathematical Models, Final Report, ESA/ESTEC contract
No. 7512/87/NL/PH, June
1988. |